Come see Kompac with Fujifilm & Tecnau at Drupa 2024!

Kompac will be at Drupa 2024

Kompac will be at Drupa from May 28 - June 7, 2024. Kompac will be featuring 2 of our Phoenix machines in two different booths. Kompac will have a Phoenix 20 inline with a Tecnau Stack1212 in booth B41 in hall 8A. Kompac also will be showing a Phoenix 30 inline with a Fuji JPress 750 and that will be in booth A02 hall 8B. Come see our machines run inline and Kompac will also have samples including spot jobs and di-cut jobs that have been run on the Onyx 30. 

Phoenix 20S Bypass Tecnau Stack 1212

Kompac & Tecnau Partner on an Inline Coater/Cutter/Stacker Perfect for Direct Mail 

Kompac and Tecnau have come together to make an all in one coater, cutter and stacker. Sheets are effortlessly loaded into the Phoenix 20 Pallet Feeder, eliminating the need for manual handling. The Feeder delivers sheets precisely on demand into the Phoenix 20 coating module. This is where the coating is seamlessly applied to the sheet and we have an extensive range of coatings. 

After the sheets are coated and dried by our IR and UV dryers they are then passed through to the Stack 1212. The sheets are directed into the Stack 1212’s alignment module, where they undergo precise positioning before being transferred to the cutter. The cutter performs exact single-slits or gutter cuts along the direction of travel as needed, trims out edges, and executes single or double cuts across the direction of travel to accommodate full bleed documents. The Phoenix 20 in configuration with the Tecnau Stack 1212 supports impositions from 1-up to an impressive maximum of 21-up (with no bleed removal, or a maximum of 18 up with bleed removal). 

Key features of Phoenix 20 Stack 1212

  • All in one B2 sheet-fed cut & stack coating system 

  • Configurable inline or near line

  • Convenient hands off feeding from pallet 

  • Around the clock support with IOTech 4.0

  • Perfect system for direct mail 

Phoenix 20i Inline Fujifulm J Press 750S

Kompac & Fujifilm Partner on a Phoenix Coater Inline with the J Press 750

The Phoenix 30 coating system offers unparalleled flexibility as it can be configured either in-line or nearline, and in simplex or duplex modes. With its modular design, customers have the freedom to tailor the equipment to meet their exact business needs. The Phoenix 30 is designed with precision and efficiency in mind, ensuring consistent and high quality results every time. The equipment is user friendly and easy to maintain minimizing downtime 


Key features of Phoenix 30 & Fujifilm J Press 750 

  •  All in one printer and coater 

  • Coat with UV or AQ 

  • Can be Inline or nearline 

  • Convenient hands off feeding from Jpress 

  • When inline it can be rolled away when not needed

Kompac Vac: You Solution to UV & AQ Clean up

The Kompac Vac 

Kompac Technologies has a patented cleaning system that is the fastest, easiest and cheapest on the market. Say goodbye to spending a bunch of money on cleaner and wasting 45 minutes to clean a machine. The Kompac Vac will take no longer than 2 minutes when cleaning up UV or AQ coatings. 

Introducing the Kompac Vac: A Quantum Leap in Cleaning Efficiency

Gone are the days of climbing in the machine and getting coating all over you and your clothes. With the Kompac Vac you wont need to open any cabinets or undo any screws or bolts. This revolutionary cleaning system will keep you clean and most importantly it will not have you down for long periods of time. Another thing is you will save money on coating and cleaner as well! 

Key Features of the Kompac Vac:

  1. Fast clean up: The Kompac Vac is the easiest and fastest way to clean out of all the coaters on the market. It takes 2 minutes to clean and within 5 minutes you can change your coating and be back up and running. 

  2. Savings: Savings will come in two ways because you will save on coating and cleaners. The coating in the unit is only a couple ounces at a time with no recirculation. Which means you will never have any dust or paper lint in the coating bucket. Another way of saving is you will not have to purchase cleaner as often because you will not be using as much. 

  3. Improve Clean Up Down Time: When you clean our machines you will be down for no longer than 2 minutes cleaning and another 3 minutes if you need to change over to a different coating. This improves productivity time and decreases down time. 

Compatibility and Availability:

The Kompac Vac is fully compatible with all Kompac Coaters from the Elite 10 to the Onyx 30, ensuring that a wide range of users can harness its benefits.

For more information or to place an order, visit our (www.store.kompactech.com) or contact our sales team at (cust.service@kompactech.com)




Introducing the Kompac Kwik Change: A Quantum Leap in Printing Efficiency

Revolutionary Hotswappable Assembly for Seamless Printing!

Kompac Technologies is excited to introduce a game-changing innovation that is set to transform the world of printing: the Kompac Kwik Change. Say goodbye to prolonged downtime and tedious recalibrations – this groundbreaking advancement promises to revolutionize the way you approach printing assemblies.

Introducing the Kompac Kwik Change: A Quantum Leap in Printing Efficiency

Gone are the days of using cumbersome tools to painstakingly remove rollers and assemblies, resulting in the loss of meticulously configured settings. With the new Kwik Change you can now seamlessly drop in and out the assembly, just like changing a toner cartridge. This cutting-edge design eliminates the need for recalibrations and resets, significantly reducing assembly swap downtime.

Pictured: Phoenix 30 Kwik Change Kit

Key Features

1. Effortless Configuration Changes: The new assembly system ensures that your preconfigured settings remain intact even when removing the roller assembly. This means no more wasted time on reconfigurations, enabling swift transitions between different printing jobs.

2. Adaptability to Specific Coatings: No longer will you have to re-calibrate or clean the printing assembly for specific coatings. The Kwik Change allows for multiple units to be used, each tailored to a specific coating, without compromising on quality or efficiency.

3. Instant Swap: Experience a dramatic reduction in downtime during assembly changes. The entire assembly can be hot swapped in a matter of seconds, enabling you to switch between different rollers for various printing tasks seamlessly.

4. Enhanced Versatility: Our innovative assembly accommodates various setup configurations, providing you with unmatched flexibility in tackling diverse printing challenges.

5. Reliable Backup Solution: For machines operating around the clock, the Kwik Change acts as a fail-safe. In case of emergencies or maintenance requirements, simply insert the assembly and secure it with four locking pins to keep production running smoothly.

Pictured: Phoenix 20 Backing Plate Kit

Compatibility and Availability

The Kwik Change is fully compatible with all Phoenix Coating & Priming systems and a selection of EZ Koat Plus systems, ensuring that a wide range of users can harness its benefits.

Elevate Your Printing Experience Today!

Upgrade to the future of printing with the Kompac Kwik Change. Say goodbye to downtime, recalibrations, and lost configurations. Embrace the seamless, efficient, and versatile printing experience your company deserves.


For more information contact our sales team at (sales@kompactech.com)




Kompac & HP: Phoenix In-Line UV/AQ Coating & Priming System

Phoenix 20 In-Line HP Indigo 7K Digital Press

Phoenix In-Line

The Phoenix coating system provides exceptional flexibility, allowing configuration in either in-line or nearline setups and in simplex or duplex modes. Its modular design empowers customers to customize the equipment to precisely match their business requirements, making it an ideal solution for businesses aiming to enhance operational efficiency. Utilizing Kompac’s distinctive UV or Aqueous coatings, the Phoenix allows users to attain precise flood coating on various substrates, emphasizing ease of operation and cost efficiency. Moreover, the Phoenix is seamlessly compatible with HP Indigo Digital Presses, ensuring a harmonious integration for a comprehensive and efficient printing experience.

Engineered with a focus on precision and efficiency, the Phoenix ensures consistent and high-quality results with every operation. Moreover, the system is engineered with a keen focus on cost efficiency, ensuring that businesses can achieve high-quality flood coating without compromising their bottom line.

Phoenix 20 In-Line Duplex

Phoenix In-Line Duplex UV/AQ Coating & Priming System

The Phoenix can also be configured to a duplex mode allowing for flood coating and priming, with sheet turning capability for two-sided applications. Configured inline or nearline, the system is designed as a coater, sheet turner, and a second coater, ideal for duplexing in a single pass. With flexibility in mind, the Phoenix Duplex is designed so that different finishes can be applied to each side. The system can be configured to apply multiple primers/coatings per side in a single pass.

Available Options for Phoenix

Patented Kompac Coating System

Patented Hybrid Chambered Anilox System

Patent Pending Duplexing System

Patented Kompac Vac Cleaning System

Patented Infra-red Drying System

Hybrid IR Drying System

Corona Treating (available on Phoenix only)

IOTech4 (preset jobs & track, remote troubleshoot)

IOTech4

Experience the epitome of connectivity and control with our cutting-edge hardware and software platform IOTech4. With cloud based real-time monitoring and reporting, gain access to vital information such as job run-time, impression count, operator statistics and coating usage.

Our innovative system also allows for efficient job presets via part numbers, ensuring minimal operator errors from shift to shift. Receive instant alerts for necessary maintenance and keep track of employee performance reports, all at your fingertips. IOTech4 offers remote troubleshooting boosting productivity and streamlining daily coating operation.

Phoenix 20

Kompac’s Guarantee

Harnessing the innovative capabilities of Kompac’s distinct UV or Aqueous coatings, Kompac coating systems stand as the pinnacle for users seeking to achieve meticulous flood coating on a diverse range of substrates. Our cutting-edge technology places a significant emphasis on both operational simplicity and cost efficiency, ensuring that users can navigate the coating process with ease while optimizing resource expenditure.

The Phoenix not only offers the capability to apply Kompac’s signature finishes but also ensures precision in every coating application. This precision extends across a spectrum of substrates, underscoring the versatility of the Phoenix in accommodating varied materials with consistent and impeccable results.

In the pursuit of operational excellence, the Phoenix has been meticulously designed to streamline any job that’s thrown at it. Designed and manufactured in the United States, our machines are made with the highest quality parts available guaranteeing they’ll last a lifetime.