Save 2¢ a sheet by priming substrates for an HP Indigo

Did you know...

Kompac can help you prime substrates for the HP Indigo

- saving up to 2¢ a sheet over purchasing pretreated paper! 

By priming substrates in-house, there are considerable logistics, inventory, and cost savings over having to purchase a line of digital paper. 

Pictured L to R: High gloss flood coating, Soft Touch coating, and UV matte coating on prints from an HP Digital Printer

Choose from our EZ Koat 20, EZ Koat 30, or Onyx 30 (pictured) for converting untreated stock to Indigo-ready substrate. Compatible stocks include card stock, synthetics, plastics, lenticular and thin. After printing the primed stock, flood coat (EZ Koat 20/30) or flood and/or spot coat (Onyx 30) to enhance and enrich your prints. 

Add high gloss shine, texture and grit, spot UV embellishments, scratch off spots, matte, pearlescent, soft touch feeling, spot not, areas, three-dimensional effects, and more! Digital or inkjet, sheet or roll, small or large volumes - Kompac will have a coating system that will fit your needs.

Pictured: Scratch-off coating

NEW FROM KOMPAC: Chambered Anilox for Soft Touch & Matte Coatings

Why Only Run One Coating, When You Can Run Many?

Users can now easily run a full spectrum of coatings including: high gloss, gloss, semi gloss, satin, matte, soft touch and more - all on one machine! The NEW Kompac Chambered Anilox Roller System makes it easy to run more difficult-to-run coatings like matte and soft touch. Changeover between systems takes minutes! 

For Quality Soft Touch and Matte Coating Finishes

The Kompac Chambered Anilox Roller System allows users to easily apply soft touch and matte coatings to sheets or web. The air tight handling of coating runs aqueous, matte and soft touch coating without drying and breaking down.

• Chambered anilox co-exists with standard coating unit

• Ideal for HP Indigo, Xerox, Canon, Ricoh, Konica Minolta, Xeikon, Offset, and more!

• Available for the EZ Koat 15+, 20+ and 30+ flood coating systems in web or cut sheet configuration

• Available for the Kwik Finish 32 flood and spot coating system

• Can be retrofitted into existing EZ Koat Plus models

A full spectrum of finishes. Made easy.

The standard system operates with no coating recirculation and two-minute coating cleanup. To apply a more complex finish, simply engage the anilox system, where air tight liquid handling allows for the application of matte and soft touch coatings with ease. External coating feed and return lines circulate coating directly from the coating bucket, with no internal tanks or lines.

Proprietary servo-driven technology delivers a quality finish, with the same compact footprint and low maintenance operation Kompac has always offered. System can be field installed to most existing EZ Koat models.

Want to coat a substrate with Soft Touch?

Kompac Anilox Is The Cost Effective Solution!

EZ Koat 20 Plus with Chambered Anilox Roller

Shown at Print 18

Cost Effective Solution

The anilox roller system is a cost effective system for those looking to run multiple coatings.

Soft Touch Flood Coating

Sample printed on HP Indigo 7900 Digital Press, then flood coated with Soft Touch using the EZ Koat 20 Plus.

Kompac Chambered Anilox Rollers

Soft Touch Coating with Spot Gloss

Sample printed on HP Indigo and then coated with the Kwik Finish 32 using Soft Touch to flood coat and UV high gloss to spot coat.

EZ Koat 20 Plus with Feeder & Stacker

EK 20 Plus configured with chambered anilox roller and feeder/stacker for high volume production.

Matte Flood Coating

Sample printed on HP Indigo, and then flood coated on the EZ Koat 30 Plus using Matte Coating.

Get More Info…